View MKP-B3267P_8087970.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

film capacitors metallized polypropylene film capacitors (mkp) series/type: b32671p ... b32673p date: april 2014 ? epcos ag 2014. reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without epcos' prior express consent is prohibited.
typical applications pfc (power factor correction) climatic max. operating temperature: 125 c climatic category (iec 60068-1): 55/110/56 construction dielectric: polypropylene (pp) wound capacitor technology plastic case (ul 94 v-0) epoxy resin sealing features very compact design very small dimensions very high ripple and peak current high frequency ac operation capability high voltage capability excellent self-healing property rohs-compatible halogen-free capacitors available on request terminals parallel wire leads, lead free, tinned special lead lengths available on request marking manufacturer's logo lot number, series number rated capacitance (coded) capacitance tolerance (code letter) rated dc voltage date of manufacture (coded) delivery mode bulk (untaped) taped (ammo pack or reel) for notes on taping, refer to chapter "taping and packing?. dimensional drawing dimensions in mm lead spacing 0.4 lead diameter d 1 0.05 type 10 0.6 b32671p 15 0.8 b32672p 22.5 0.8 b32673p metallized polypropylene film capacitors (mkp) b32671p ... b32673p power factor correction page 2 of 18 please read cautions and warnings and important notes at the end of this document.
overview of available types lead spacing 10 mm 15 mm 22.5 mm type b32671p b32672p b32673p page 4 5 6 v rms (v ac) 160 200 200 160 200 200 160 200 200 v r (v dc) 450 520 630 450 520 630 450 520 630 c r ( m f) 0.068 0.082 0.10 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 1.0 1.5 2.0 2.2 b32671p ... b32673p power factor correction page 3 of 18 please read cautions and warnings and important notes at the end of this document.
ordering codes and packing units (lead spacing 10 mm) v r v dc v rms f 1 khz v ac c r m f ordering code (composition see below) max. dimensions w h l mm ammo pack pcs./moq reel pcs./moq untaped pcs./moq moq = minimum order quantity, consisting of 4 packing units. further e series, intermediate capacitance values and closer tolerance on request. composition of ordering code + = capacitance tolerance code: *** = packaging code: j = 5% k = 10% m = 20% 289 = straight terminals, ammo pack 189 = straight terminals, reel 240 = crimped down to lead spacing 7.5 mm, ammo pack 140 = crimped down to lead spacing 7.5 mm, reel 003 = straight terminals, untaped (lead length 3.2 0.3 mm) 000 = straight terminals, untaped (lead length 6 1 mm) 450 160 0.10 b32671p4104+*** 4.0 9.0 13.0 4000 6800 4000 0.15 b32671p4154+*** 4.0 9.0 13.0 4000 6800 4000 0.18 b32671p4184+*** 5.0 11.0 13.0 3320 5200 4000 0.22 b32671p4224+*** 5.0 11.0 13.0 3320 5200 4000 0.27 b32671p4274+*** 5.0 11.0 13.0 3320 5200 4000 0.33 b32671p4334+*** 6.0 12.0 13.0 2720 4400 4000 0.39 b32671p4394+*** 6.0 12.0 13.0 2720 4400 4000 0.47 b32671p4474+*** 6.0 14.0 13.0 2720 4400 4000 0.68 b32671p4684+*** 7.0 16.0 13.0 4000 1.0 b32671p4105+*** 8.0 17.5 13.0 4000 520 200 0.082 b32671p5823+*** 4.0 9.0 13.0 4000 6800 4000 0.10 b32671p5104+*** 5.0 11.0 13.0 3320 5200 4000 0.15 b32671p5154+*** 5.0 11.0 13.0 3320 5200 4000 0.22 b32671p5224+*** 6.0 12.0 13.0 2720 4400 4000 0.33 b32671p5334+*** 7.0 16.0 13.0 4000 0.47 b32671p5474+*** 8.0 17.5 13.0 4000 630 200 0.068 b32671p6683+*** 4.0 9.0 13.0 4000 6800 4000 0.082 b32671p6823+*** 5.0 11.0 13.0 3320 5200 4000 0.10 b32671p6104+*** 5.0 11.0 13.0 3320 5200 4000 0.15 b32671p6154+*** 6.0 12.0 13.0 2720 4400 4000 0.18 b32671p6184+*** 6.0 12.0 13.0 2720 4400 4000 0.22 b32671p6224+*** 6.0 14.0 13.0 2720 4400 4000 0.33 b32671p6334+*** 8.0 17.5 13.0 4000 0.39 b32671p6394+*** 8.0 17.5 13.0 4000 b32671p power factor correction page 4 of 18 please read cautions and warnings and important notes at the end of this document.
ordering codes and packing units (lead spacing 15 mm) v r v dc v rms f 1 khz v ac c r m f ordering code (composition see below) max. dimensions w h l mm ammo pack pcs./moq reel pcs./moq untaped pcs./moq moq = minimum order quantity, consisting of 4 packing units. further e series, intermediate capacitance values and closer tolerance on request. composition of ordering code + = capacitance tolerance code: *** = packaging code: j = 5% k = 10% m = 20% 289 = straight terminals, ammo pack 189 = straight terminals, reel 255 = crimped down to lead spacing 7.5 mm, ammo pack 155 = crimped down to lead spacing 7.5 mm, reel 003 = straight terminals, untaped (lead length 3.2 0.3 mm) 000 = straight terminals, untaped (lead length 6 1 mm) 450 160 0.10 b32672p4104+*** 5.0 10.5 18.0 4680 5200 4000 0.22 b32672p4224+*** 5.0 10.5 18.0 4680 5200 4000 0.33 b32672p4334+*** 5.0 10.5 18.0 4680 5200 4000 0.47 b32672p4474+*** 5.0 10.5 18.0 4680 5200 4000 0.56 b32672p4564+*** 6.0 11.0 18.0 3840 4400 4000 0.68 b32672p4684+*** 6.0 12.0 18.0 3840 4400 4000 1.0 b32672p4105+*** 7.0 12.5 18.0 3320 3600 4000 1.5 b32672p4155+*** 9.0 17.5 18.0 2560 2800 2000 2.0 b32672p4205+*** 9.0 17.5 18.0 2560 2800 2000 2.2 b32672p4225+*** 11.0 18.5 18.0 2200 1200 520 200 0.15 b32672p5154+*** 5.0 10.5 18.0 4680 5200 4000 0.22 b32672p5224+*** 5.0 10.5 18.0 4680 5200 4000 0.33 b32672p5334+*** 6.0 11.0 18.0 3840 4400 4000 0.47 b32672p5474+*** 7.0 12.5 18.0 3320 3600 4000 0.68 b32672p5684+*** 8.5 14.5 18.0 2720 2800 2000 1.0 b32672p5105+*** 9.0 17.5 18.0 2560 2800 2000 1.5 b32672p5155+*** 11.0 18.5 18.0 2200 1000 630 200 0.15 b32672p6154+*** 5.0 10.5 18.0 4680 5200 4000 0.22 b32672p6224+*** 6.0 11.0 18.0 3840 4400 4000 0.33 b32672p6334+*** 7.0 12.5 18.0 3320 3600 4000 0.47 b32672p6474+*** 8.0 14.0 18.0 2920 3000 2000 0.68 b32672p6684+*** 9.0 17.5 18.0 2560 2800 2000 1.0 b32672p6105+*** 11.0 18.5 18.0 2200 1000 b32672p power factor correction page 5 of 18 please read cautions and warnings and important notes at the end of this document.
ordering codes and packing units (lead spacing 22.5 mm) v r v dc v rms f 1 khz v ac c r m f ordering code (composition see below) max. dimensions w h l mm ammo pack pcs./moq reel pcs./moq untaped pcs./moq moq = minimum order quantity, consisting of 4 packing units. further e series, intermediate capacitance values and closer tolerance on request. composition of ordering code + = capacitance tolerance code: *** = packaging code: j = 5% k = 10% m = 20% 289 = straight terminals, ammo pack 189 = straight terminals, reel 003 = untaped (lead length 3.2 0.3 mm) 000 = untaped (lead length 6 1 mm) 450 160 1.0 b32673p4105+*** 6.0 15.0 26.5 2720 2800 2880 1.5 b32673p4155+*** 7.0 16.0 26.5 2320 2400 2520 2.2 b32673p4225+*** 8.5 16.5 26.5 1920 2000 2040 520 200 0.47 b32673p5474+*** 6.0 15.0 26.5 2720 2800 2880 0.56 b32673p5564+*** 6.0 15.0 26.5 2720 2800 2880 0.68 b32673p5684+*** 6.0 15.0 26.5 2720 2800 2880 1.0 b32673p5105+*** 7.0 16.0 26.5 2320 2400 2520 1.5 b32673p5155+*** 10.5 16.5 26.5 1560 1600 2160 2.2 b32673p5225+*** 10.5 20.5 26.5 2160 630 200 0.33 b32673p6334+*** 6.0 15.0 26.5 2720 2800 2880 0.47 b32673p6474+*** 6.0 15.0 26.5 2720 2800 2880 0.56 b32673p6564+*** 6.0 15.0 26.5 2720 2800 2880 0.68 b32673p6684+*** 7.0 16.0 26.5 2320 2400 2520 1.0 b32673p6105+*** 8.5 16.5 26.5 1920 2000 2040 1.5 b32673p6155+*** 10.5 18.5 26.5 1560 1600 2160 2.2 b32673p6225+*** 12.0 22.0 26.5 1800 b32673p power factor correction page 6 of 18 please read cautions and warnings and important notes at the end of this document.
technical data reference standard: iec 60384-16. all data given at t = 20 c, otherwise is specified. operating temperature range max. operating temperature t op, max upper category temperature t max lower category temperature t min rated temperature t r +125 c +110 c 55 c +85 c dissipation factor tan d (in 10 -3 ) at 20 c (upper limit values) 1 khz 10 khz 100 khz 1.0 2.5 25.0 insulation resistance r ins at 100 v or time constant t = c r r ins at 20 c, rel. humidity 65% (minimum as-delivered values) 30 g w (c r 0.33 m f) 10000 s (c r > 0.33 m f) dc test voltage 1.4 v r , 2 s category voltage v c (continuous operation with v dc or v ac at f 1 khz) t a ( c) dc voltage derating ac voltage derating t a 85 85 10% > 4 upper limit values < 150 m w (c r 0.33 f) < 50 s (c r 3 0.33 f) b32671p ... b32673p power factor correction page 7 of 18 please read cautions and warnings and important notes at the end of this document.
pulse handling capability "dv/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in v/ m s. "k 0 " represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in v 2 / m s. note: the values of dv/dt and k 0 provided below must not be exceeded in order to avoid damaging the capacitor. these parameters are given for isolated pulses in such a way that the heat generated by one pulse will be completely dissipated before applying the next pulse. for a train of pulses, please refer to the curves of permissible ac voltage-current versus frequency. dv/dt values lead spacing 10 mm 15 mm 22.5 mm v r v rms v dc v ac dv/dt in v/ m s 450 160 140 120 100 520 200 200 160 110 630 200 250 180 130 k 0 values lead spacing 10 mm 15 mm 22.5 mm v r v rms v dc v ac k 0 in v 2 / m s 450 160 126000 108000 90000 520 200 208000 166000 114000 630 200 315000 226000 163000 impedance z versus frequency f (typical values) b32671p ... b32673p power factor correction page 8 of 18 please read cautions and warnings and important notes at the end of this document.
permissible ac voltage v rms versus frequency f (for sinusoidal waveforms t a 100 c) for t a > 100 c, please use derating factor f t . lead spacing 10 mm 450 v dc/160 v ac 520 v dc/200 v ac 630 v dc/200 v ac b32671p power factor correction page 9 of 18 please read cautions and warnings and important notes at the end of this document.
permissible ac voltage v rms versus frequency f (for sinusoidal waveforms t a 100 c) for t a > 100 c, please use derating factor f t . lead spacing 15 mm 450 v dc/160 v ac 520 v dc/200 v ac 630 v dc/200 v ac b32672p power factor correction page 10 of 18 please read cautions and warnings and important notes at the end of this document.
permissible ac voltage v rms versus frequency f (for sinusoidal waveforms t a 100 c) for t a > 100 c, please use derating factor f t . lead spacing 22.5 mm 450 v dc/160 v ac 520 v dc/200 v ac 630 v dc/200 v ac b32673p power factor correction page 11 of 18 please read cautions and warnings and important notes at the end of this document.
permissible ac current i rms versus frequency f (for sinusoidal waveforms t a 100 c) for t a > 100 c, please use derating factor f t . lead spacing 10 mm 450 v dc/160 v ac 520 v dc/200 v ac 630 v dc/200 v ac b32671p power factor correction page 12 of 18 please read cautions and warnings and important notes at the end of this document.
permissible ac current i rms versus frequency f (for sinusoidal waveforms t a 100 c) for t a > 100 c, please use derating factor f t . lead spacing 15 mm 450 v dc/160 v ac 520 v dc/200 v ac 630 v dc/200 v ac b32672p power factor correction page 13 of 18 please read cautions and warnings and important notes at the end of this document.
permissible ac current i rms versus frequency f (for sinusoidal waveforms t a 100 c) for t a > 100 c, please use derating factor f t . lead spacing 22.5 mm 450 v dc/160 v ac 520 v dc/200 v ac 630 v dc/200 v ac b32673p power factor correction page 14 of 18 please read cautions and warnings and important notes at the end of this document.
maximum ac voltage (v rms ), current (i rms ) vs. frequency and temperature for t a > 100 oc the graphs described in the previous section for the permissible ac voltage (v rms ) or current (i rms ) vs. frequency are given for a maximum ambient temperature t a 100 oc. in case of higher ambient temperatures (t a ), the self-heating ( d t) of the component must be reduced to avoid that temperature of the component (t op = t a + d t) reaches values above maximum operating temperature.the factor f t shall be applied in the following way: and f t is given by the following curve: b32671p ... b32673p power factor correction page 15 of 18 please read cautions and warnings and important notes at the end of this document.
testing and standards test reference conditions of test performance requirements electrical parameters iec 60384-16 voltage proof, 1.4 v r , 1 minute insulation resistance, r ins capacitance, c dissipation factor, tan d within specified limits robustness of terminations iec 60068-2-21 tensile strength (test ua1) capacitance and tan d within specified limits wire diameter tensile force 0.5 < d 1 0.8 mm 10 n resistance to soldering heat iec 60068-2-20, test tb, method 1a solder bath temperature at 260 5 c, immersion for 10 seconds d c/c 0 2% i d tan d l 0.001 rapid change of temperature iec 60384-16 t a = lower category temperature t b = upper category temperature five cycles, duration t = 30 min. i d c/c 0 i 2% i d tan d i 0.002 r ins 3 50% of initial limit vibration iec 60384-16 test f c : vibration sinusoidal displacement: 0.75 mm accleration: 98 m/s 2 frequency: 10 hz ... 500 hz test duration: 3 orthogonal axes, 2 hours each axe no visible damage bump iec 60384-16 test eb: total 4000 bumps with 390 m/s 2 mounted on pcb 6 ms duration no visible damage i d c/c 0 i 2% i d tan d i 0.001 r ins 3 50% of initial limit climatic sequence iec 60384-16 dry heat tb / 16 h. damp heat cyclic, 1st cycle + 55 c / 24h / 95% ... 100% rh cold ta / 2h damp heat cyclic, 5 cycles + 55 c / 24h / 95% ... 100% rh no visible damage i d c/c 0 i 2% i d tan d i 0.001 r ins 3 50% of initial limit damp heat steady state iec 60384-16 test ca 40 c / 93% rh / 56 days no visible damage i d c/c 0 i 3% i d tan d i 0.003 r ins 3 50% of initial limit high temperature high humidity with load 60 c / 95% rh / 1000 hours with v r, dc no visible damage i d c/c 0 i 10% i d tan d i 0.004 r ins 3 50% of initial limit b32671p ... b32673p power factor correction page 16 of 18 please read cautions and warnings and important notes at the end of this document.
endurance a 85 c/ 1.1 v r / 1000 hours no visible damage i d c/c 0 i 5% i d tan d i 0.004 r ins 3 50% of initial limit endurance b 110 c/ 1.1 v c / 1000 hours no visible damage i d c/c 0 i 10% i d tan d i 0.004 r ins 3 50% of initial limit endurance c 125 c/ 1.1 v c / 1000 hours no visible damage i d c/c 0 i 10% i d tan d i 0.004 r ins 3 50% of initial limit endurance d 85 c/ v r + 4 a rms,1000 khz / 1000 hours no visible damage i d c/c 0 i 10% i d tan d i 0.004 r ins 3 50% of initial limit b32671p ... b32673p power factor correction page 17 of 18 please read cautions and warnings and important notes at the end of this document.
the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical re- quirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application . as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incum- bent on the customer to check and decide whether an epcos product with the properties de- scribed in the product specification is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified . in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-specific notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our ma- terial data sheets on the internet (www.epcos.com/material). should you have any more de- tailed questions, please contact our sales offices. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product specifications. please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . consequently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the fore- going for customer-specific products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current ver- sion of the "general terms of delivery for products and services in the electrical in- dustry" published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, tfap, thermofuse, windcap are trademarks registered or pending in europe and in other coun- tries. further information will be found on the internet at www.epcos.com/trademarks. important notes page 18 of 18

▲Up To Search▲

Price & Availability of MKP-B3267P

	To Download MKP-B3267P Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .